October 5, 2023
Estimated reading time: < 1 min
The below video demonstrates the startup process for Freejet 330-series printers that are fully installed and already being used for production work.
This video includes a demonstration of the white ink circulation feature of the 330TX PLUS. This feature minimizes the need for priming the white ink lines for separation.
For both the 330TX and the 330TX PLUS models, it is helpful to shake the white ink bottles regularly to thoroughly mix the white pigment and to counter the development of sediment on the bottom of the white ink bottles from pigment settlement.
It’s recommended that this be done during the shutdown process, but if the printer has been idle for several days then it’s recommended to mix the white ink before starting up the printer, waiting at least 15 to 30 minutes before starting up so any bubbles introduced from shaking the ink can first dissipate.
When finished, use a clean cloth to wipe away any ink that appears to be blocking the breathing holes in the center of the bottle caps.
It’s recommended that this be done during the shutdown process, but if the printer has been idle for several days then it’s recommended to mix the white ink before starting up the printer, waiting at least 15 to 30 minutes before starting up so any bubbles introduced from shaking the ink can first dissipate.
When finished, use a clean cloth to wipe away any ink that appears to be blocking the breathing holes in the center of the bottle caps.
You can leave feedback about this article:
Your feedback is highly valued! Thank you for taking the time to share with us.
Views: 392
Not finding what you need?
You can contact our technical support team by sending an email to support@omniprintonline.com with your company name, contact name, phone number, printer serial number, and a quick description of how we can help you.
This will automatically open a support case for you in our ticketing system and a technical support rep will follow up with you shortly.